3M™ PPS™ Series 2.0 Lids, Midi and Mini, 125 μm, 26205
- Part Number 26205
- 3M ID 7100134612
Details
Highlights
- Integrated locking collars on lids help reduce paint build-up and possible contamination
- Improved Fluid Flow & Quality: New domed Standard/Large lid design allows for up to 90 ml of material to be held below the filter and lets you spray filtered material on demand, reducing inconsistent spray due to air-entrapment and sputter
- A wider fluid spout and a full-diameter filter for the highest quality filtration
- Larger Sealing Plugs: A superior seal to protect your coatings. Turn the 3M™ PPS™ Series 2.0 cup system upside down and use the new sealing plug as a base, helping keep the built-in filter wet and reducing the need for replacement lids
- Two Filter Mesh Sizes: 3M™ PPS™ Series 2.0 Spray Cup System filters are available in 200 micron and 125 micron sizes to suit solvent-base and waterborne systems, be sure to consult the paint material manufacturer for recommended filter mesh sizes
- This product is only to be used with the 3M™ PPS™ Series 2.0 items
These replacement lids fit 3M™ PPS™ Series 2.0 liners and cups. Case contains 50 lids with 200 or 125 micron filters.
3M™ PPS™ Series 2.0 integrated locking collars on lids to help reduce paint build-up and possible contamination. PPS™ Series 2.0 lids also feature a wider fluid spout and a full diameter filter for the highest quality filtration. New domed Standard/Large lid design allows for up to 90 ml of material to be held below the filter and lets you spray filtered material on demand, reducing inconsistent spray due to air-entrapment and sputter.
Typical Properties
Resources
Related Products
| Cup Size | Mini, Midi | |||
| Product Type | Lid | |||
| Filter Micron Rating | 125 μm |
3M™ PPS™ Series 2.0 Lids, Midi and Mini, 125 μm, 26205
3M™ PPS™ Series 2.0 UV Kit
3M™ PPS™ Series 2.0 Adapter
3M™ PPS™ Series 2.0 Cups, Standard, 650 ml, 26001Related products
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
